Dimensional Tolerance of Cold Rolled Stainless Steel
Thickness Tolerance for Strips
(mm)
| Thickness(t) | Width |
| < 1250 | |
| 0.30≦t＜0.60 | ±0.05 |
| 0.60≦t＜0.80 | ±0.07 |
| 0.80≦t＜1.00 | ±0.09 |
| 1.00≦t＜1.25 | ±0.10 |
| 1.25≦t＜1.60 | ±0.12 |
Thickness Tolerance for Strips (ET)
(mm)
| Width (w) | |||||
| ＜160 | 160≦w＜250 | 250≦w＜400 | 400≦w＜500 | ||
| Thickness (t) | ＜0.10 | ±0.10 | ±0.20 | - | - |
| 0.10≦t＜0.16 | ±0.15 | ±0.20 | - | - | |
| 0.16≦t＜0.25 | ±0.020 | ±0.025 | ±0.030 | ±0.030 | |
| 0.25≦t＜0.40 | ±0.025 | ±0.030 | ±0.035 | ±0.035 | |
| 0.40≦t＜0.60 | ±0.035 | ±0.040 | ±0.040 | ±0.040 | |
| 0.60≦t＜0.80 | ±0.040 | ±0.045 | ±0.045 | ±0.045 | |
| 0.80≦t＜1.00 | ±0.04 | ±0.05 | ±0.05 | ±0.05 | |
| 1.00≦t＜1.25 | ±0.05 | ±0.05 | ±0.05 | ±0.06 | |
Width Tolerance for Strip
(mm)
| Edge | Width (w) | |
| w＜400 | 400≦w＜500 | |
| Mill Edge | +10 0 |
+20 0 |
| Slit Edge | +5 0 |
+5 0 |
Width Tolerance for Strip (ET)
(mm)
| Width (w) | |||||
| ＜160 | 160≦w＜250 | 250≦w＜400 | 400≦w＜500 | ||
| Thickness (t) | ＜0.60 | ±0.15 | ±0.20 | ±0.25 | ±0.30 |
| 0.60≦t＜1.00 | ±0.20 | ±0.25 | ±0.25 | ±0.30 | |
| 1.00≦t＜1.25 | ±0.20 | ±0.30 | ±0.30 | ±0.40 | |
Maximum Value of Strip Camber
| Width | Maximum Value of Strip Camber |
| 40≦t＜80 | 8mm per 2000mm in length at optional part |
| 80≦t＜500 | 4mm per 2000mm in length at optional part |
* Remarks: (1) Application of the strip camber shall be as given in Figure 1.
(2) The strip camber of under 40mm width shall be agreed upon between the parties concerned
with delivery.
Application of strip Camber
